SenTec

FME804 Full Stainless Steel High Pressure Electromagnetic Flowmeter

FME800 series intelligent electromagnetic flowmeter is a new generation of fully intelligent flowmeter developed by our company based on Faraday electromagnetic induction principle. The electromagnetic flowmeter can not only measure the volume flow of conductive liquid, but also measure the volume flow of corrosive liquid such as strong acid and alkali, and even liquid-solid two-phase suspension liquid such as mud, pulp and pulp.

FME800 series intelligent electromagnetic flowmeter is a new generation of fully intelligent flowmeter developed by our company based on Faraday electromagnetic induction principle. The electromagnetic flowmeter can not only measure the volume flow of conductive liquid, but also measure the volume flow of corrosive liquid such as strong acid and alkali, and even liquid-solid two-phase suspension liquid such as mud, pulp and pulp. It is widely used in the fields of petroleum, chemical industry, metallurgy, textile, pharmacy, food and beverage, paper making, electric power, urban water supply and drainage and environmental protection.

According to its application, the types of electromagnetic flowmeter have Magnetic Water Flow Meter,Remote Magnetic Sewage Flow Meter,Insertion Magnetic Flow Meter,Magnetic Sanitary Flow Meter,Magnetic Stainless Steel Flow Meter,Magnetic Battery Operated Flow Meter,Magnetic Large Diameter Pipe Flow Meter, Magnetic High Pressure Flow Meter, Magnetic Open Channel Flow Meter etc.

Parameters

Nominal diameterDN2-DN2200mm
Nominal pressureDN2-DN150 ≤1.6MPa

DN200-DN1000 ≤1.6MPa

DN1100-DN2200 ≤0.6MPa

10-42MPa(special customized)

Accuracy±0.5%,±1.0%
Repeatability0.10%
Dielectric conductivityConductive medium (conductivity ≥ 5μS / cm)
Maximum medium temperatureFEP or F46 < 160 ° C

Neoprene (CR) < 60 ° C

PTFE lining (PTFE or F4) < 180 ° C

Polyurethane rubber (PU) < 40 ° C

Power supplySingle phase AC 85-250V (45-63Hz) or DC 20-36VDC
Output signal4-20mA / 0-10mA current output, pulse / frequency output, switch signal output (optional);
Communication modeRS485, RS232, MODBUS protocol, HART Protocol (optional)
Protection levelIP65, IP68
Ambient temperature-30°C~ 60°C
Ambient humidity5% ~ 95%
Power dissipationLess than 20W

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.