SenTec

sentec

SRL900 Laser radar level gauge

The SRL900 laser radar level gauge adopts the laser measurement method to measure the material level without contact, and is not affected by the viscosity corrosion of the material. The protection grade reaches IP67 and can be used in a humid environment.

The SRL900 laser radar level gauge adopts the laser measurement method to measure the material level without contact, and is not affected by the viscosity corrosion of the material. The protection grade reaches IP67 and can be used in a humid environment. The host has an LCD to visually display the liquid level. Observing the position, with a man-machine interface is more convenient to set up, this product has the function of distinguishing the agitator, and can be used very reliably in the working conditions of the reactor crystallizer.

Parameters

LaserVisible laser wavelength: 635nm, <1mW, <15mm@5m, for aiming
Infrared laser Wavelength: 905nm, <0.8mW, 1kHz, 10ns pulse, for measurement
MeasurementMeasuring range: 0.02m~100m (special customizable to 350m)
Resolution: 1mm
Absolute accuracy: ±1cm
OutputAnalog output: 4~20mA (three-wire system), load capacity >300Ω
EnvironmentTemperature: -55~150°C,
Storage temperature: -20~70 °C.
Relative humidity: 10~95% RH.
Altitude: 2000m.
Temperature of the measured medium: up to 2000 °C.
Laser level gauge protection rating: IP67.
Power supplyPower supply: DC24V AC or DC power supply
Power consumption: 1W
Calibration and operationMake sure the installation is complete before calibrating the meter.
The zero point, range, setting unit, container height, damping time, and display output can be adjusted through the buttons on the instrument panel.

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.