SenTec

SPX504 Online Micro Motion Density Meter

SPX504 online tMicro Motion Density Meter is usually used to measure liquid media in tanks and pipelines. It can meet users’ real-time monitoring of density, concentration, Baume degree, sugar content, solid content and other data, and is an indispensable data indicator for quality control in the production process.

INTRODUCTION

SPX504 online Micro Motion Density Meter is usually used to measure liquid media in tanks and pipelines. It can meet users’ real-time monitoring of density, concentration, Baume degree, sugar content, solid content and other data, and is an indispensable data indicator for quality control in the production process.

APPLICATION

  • Petrochemical industry: diesel, gasoline, ethylene, etc.
  • Chemical industry: sulfuric acid, hydrochloric acid, nitric acid, chloroacetic acid, ammonia, methanol, ethanol, brine, sodium hydroxide, freezing liquid, sodium carbonate, glycerol, hydrogen peroxide, etc.
  • Pharmaceutical industry: liquid medicine, biological liquid, alcohol extraction, acetone, alcohol recovery, etc.
  • Food and beverage industry: sugar water, juice, brewing, cream, etc.
  • Battery and electrolyte industry: sulfuric acid, lithium hydroxide, etc.
  • Environmental protection industry: desulfurization (lime slurry, gypsum slurry), denitrification (ammonia, urea), wastewater treatment MVR (acid, alkali, salt recovery), etc.

Parameters

Accuracy (standard conditions)±0.001g/cm3±0.5 (v/v, m/m)
Working range0~2g/cm30~100%
Repeatability±0.0001g/cm3±0.1%
Process temperature effect (corrected)±0.0001g/cm3±0.1% (per °C)
Process pressure effect (corrected)NegligibleNegligible
Process temperatureStandard: –25℃~+120℃; Customized: –25℃~+150℃
Ambient temperature–25℃~+85℃
Temperature accuracy0.5℃
Built-in temperature sensorTemperature chip
Wetted parts316L, Hastelloy, titanium alloy, ceramic, etc.
Fork tines polishedStandard polishing, PTFE coating
HousingIP67, aluminum alloy
Maximum working pressureStandard: within 1.6MPa; Special customzied: within 4MPa
Tested pressureTested at 1.5 times the maximum working pressure
Process connectionFlange; Clamp; Thread; Bracket (split)
Power Requirements1. 24VDC, 100mA

2. 220VAC to 24VDC power converter (optional)

OutputFour-wire, 4-20mA, RS485 or Hart protocol (choose one)
Electrical InterfaceM20*1.5;1/2 NPT-14
Viscosity range0-2000cP (depending on the specific characteristics of the medium)
Explosion-proofEx db ⅡC T6 Gb, Ex db ⅡC T4 Gb

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.