SenTec

SEM227 Solar Radiation shield outdoor Illuminance sensor

SEM227 Solar Radiation shield outdoor Illuminance sensor is widely used in communication room, warehouse building and automatic control and other places that need Illuminance monitoring. Safe and reliable, beautiful appearance and convenient installation.

SEM227 Solar Radiation shield outdoor Illuminance sensor is widely used in communication room, warehouse building and automatic control and other places that need Illuminance monitoring. Safe and reliable, beautiful appearance and convenient installation.

The measurement unit imported from Switzerland is used to measure accurately. It adopts special analog circuit and has wide application range. 10 ~ 30V wide voltage range, complete specifications, convenient installation. It can be applied to four wire system and three wire system at the same time.

Parameters

Parameters

Range

Resolution

Accuracy

Preheating time

Air temperature

-40℃~+120℃

0.1°C

±0.5°C(25°C)

≤2min

Air humidity

0~100%RH

0.1%RH

±3%RH(60%RH,25℃)

≤2min

Air pressure

0~120Kpa

0.1Kpa

±0.15Kpa@25℃75Kpa

≤2min

Illuminance

0-200,000 Lux

1Lux

±7%(25℃)

≤2min

Noise

30-130db

±3%F.S

0.1dB

≤2min

PM2.5 / PM10/PM1.0

0~1000ug/m3

±10%

1ug/m3

≤2min

TSP/PM100

0~20000ug/m3

±3%F.S

1ug/m4

≤2min

TVOC

0~60000ppb

1ppb

±8%FS±125ppb

≤2min

CO2

0~5000ppm

1ppm

±(40ppm+ 3%F·S)

2min

Formaldehyde

0~5ppm

0.01ppm

±5%FS

≥5 minutes

Ozone

0~10ppm

0.01ppm

±6%FS

≥5 minutes

O2

0~25%Vol

0.1%Vol

±3%FS

≥5 minutes

H2S

0~100ppm

1ppm

±3%FS

≥5 minutes

CH4

0~100%LEL

1%LEL

±5%FS

≥5 minutes

CO

0~1000ppm

1ppm

±3%FS

≥5 minutes

NO2

0~20ppm

0.1ppm

±3%FS

≥5 minutes

SO2

0~20ppm

0.1ppm

±3%FS

≥5 minutes

H2

0~1000ppm

1ppm

±3%FS

≥5 minutes

NH3

0~100ppm

1ppm

±2%FS

≥5 minutes

Power supply

DC 10-30V(default)

Max. power consumption

1.2W

Test parameters

TVOC, formaldehyde, O3, Co, CH4, O2, SO2, NO2, H2, H2S, NH3

Work environment

Temperature – 10 ℃ – 55 ℃; humidity 0 ~ 95% RH, non condensing

Signal output

RS485 output (standard Modbus RTU protocol), analoge output, RJ45

Product material

ABS

Installation method

Bracket installation

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.