SenTec

sentec

SFLS600 Integrated Electronic Float Level Temperature Switch

The SFLS600 series features a float level switch based on the SFLS600 Float Level Temperature Switch. Float ball is in the closed non-magnetic stainless steel tube is equipped with a dry spring pipe, float ball is equipped with a circular magnetic ring, float ball with the liquid level up or down and move, thereby triggering or releasing the magnetic spring switch inside the stainless steel tube, send out the switch signal.

Category

The SFLS600 series features a float level switch based on the SFLS600 Float Level Temperature Switch. Float ball is in the closed non-magnetic stainless steel tube is equipped with a dry spring pipe, float ball is equipped with a circular magnetic ring, float ball with the liquid level up or down and move, thereby triggering or releasing the magnetic spring switch inside the stainless steel tube, send out the switch signal.
– Full metal enclosure design
– The use of highlighting LED digital display, so that this series of products can used in various industrial occasions.
– Double key design and user-friendly menu make the product more convenient to use.
– Multiple connection modes can fully meet various specific installation requirements.
– The display head can be rotated by 330° to ensure that it can be installed in different ways Get the best viewing Angle.

Parameters

Measuring range (guide rod length L) :Temperature range -50… 250 ℃ is adjustable, Liquid alarm stations are optional
Measuring medium:corrosive compatible with 304 stainless steel
Pressure resistance:≤ 1.5 times of measuring range
Medium density:≥0.7g/cm
Supply voltage:12… 30 VDC
 No-load current consumption:≤30mA, at 24Vdc power supply
Switch output: Output type: push-pull type (compatible with BOTH PNP and NPN),Normally open and normally closed can be set
Output current:S1, S2: < 500mA
Current analog outputOutput type: three wire 0… 20 ma / 4… Can be set to 20 ma
Protection level:IP67
 Outlet mode:M12×1 connector
More detailsPlease refer data sheet

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.