SenTec

SUL802 2 Meter ultrasonic level switch

SUL802 2 Meter ultrasonic level switch combines ultrasonic sensors, temperature sensors, ultrasonic servo circuit, transmission circuit and uses SMD components and ASIC which is developed together with the Gemany partner.

SUL802 2 Meter ultrasonic level switch combines ultrasonic sensors, temperature sensors, ultrasonic servo circuit, transmission circuit and uses SMD components and ASIC which is developed together with the Gemany partner. All gold-plated circuit boards, internal electromagnetic shielding and software digital filter are tested for (industrial) 48 hour under high and low temperature aging.It promises higher and long-term reliability. Shell is made of solid texture and good NLEPF acoustic characteristics of synthetic material.

Parameters

Model typesSee next page
Standard test board300*300mm
Repeatability0.3% F.S
Operating Voltage10 ~ 30V DC or 15 ~ 30V DC
Temperature drift0.05%/° C (temperature compensation)
Linearity<1%
Resolution0.1% of range (0.5mm min)
Electromagnetic CompatibilityGB / T17626.2-2006 / GB / T17626.4-2008
Power consumption 20ma
LoadCurrent output: <500Q, Voltage output:> 5KQ
Protect the circuitAnti-reverse protection, transient over-voltage protection
Working temperature-20 ° C ~ + 60 ° C, -20 ° C ~ + 80 ° C
Storage temperature-40 ° C ~ + 70 ° C
Housing materialABS, Copper nickel plating, Stainless steel etc.
Protection classIP67
ConnectionM12 aviation plug, 4 or 5 pin, direct cable
Cable lengthDefault 2 meter (Support customized as request)
Signal outputAnalog output: 4~20mA, 0~10V, 0~5V

Digital output: RS485 (Modbus RTU), TTL

Relay output: PNP, NPN, 2-route PNP, 2-rout NPN

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.