SenTec

WS3033 Tunnel Ultrasonic Wind Speed sensor

WS3033 Tunnel Ultrasonic Wind Speed sensor is a special type for tunnel. The detection probe is installed on the tunnel wall to provide the wind speed and wind direction detection value in the tunnel for the tunnel general control room as the basic basis for ventilation and operation. At the same time, the analog and switch signal output from the data output interface can be connected to the PLC in the nearby sub control room, and then the data optical transceiver and optical fiber can be connected to the main control room.

WS3033 Tunnel Ultrasonic Wind Speed sensor is a special type for tunnel. The detection probe is installed on the tunnel wall to provide the wind speed and wind direction detection value in the tunnel for the tunnel general control room as the basic basis for ventilation and operation. At the same time, the analog and switch signal output from the data output interface can be connected to the PLC in the nearby sub control room, and then the data optical transceiver and optical fiber can be connected to the main control room.

Parameters

Measurement principleUltrasonic time-difference technology
InstallationWall of tunnel
Measurement rangewind speed – 30 m / s ~ +30 m / S (other range customzied)
Measurement accuracywind speed ± 0.1 M / S
Averaging time0.1 seconds to 60 minutes, adjustable
Accuracy±2%
Digital interfaceRS232,RS485
ProtocolModBus
Signal outputWind Speed:4-20 mA output(load < 500Ω)
Wind Direction: Relay output(three terminals NO or NC)
Power supply100~220VAC±10%,50Hz/60Hz
Protection GradeIP66
Operating temperature-45℃ – +75℃
Operating humidity-0 – 100%
Power consumption1W

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.