SenTec

WD300 Wind Direction Sensor

WD300 wind direction sensor is used to measure the direction value of wind and convert it into electrical signal, which can be directly transmitted to the recording equipment for processing.

WD300 wind direction sensor is used to measure the direction value of wind and convert it into electrical signal, which can be directly transmitted to the recording equipment for processing.

The sensor shell is made of aluminum, with very small dimensional tolerance, high surface accuracy, high weather resistance, high strength, corrosion resistance and water resistance; the internal circuit has been protected, and the whole sensor has good adaptability to harsh environment. The cable connector is a military plug, which has good anti-corrosion and anti-corrosion performance, can ensure the long-term use of the instrument, and cooperate with the internal imported bearing system to ensure the accuracy of wind direction collection.

The wind direction sensor adopts low inertia wind indicator and precision potentiometer, with high sensitivity and precision. The precise signal processing unit can output various signals according to the user’s requirements. The PCB of the circuit module is made of military grade a material, which ensures the stability of parameters and the quality of electrical performance; the electronic components are made of imported industrial grade chips, which makes the whole circuit have a very reliable anti electromagnetic interference ability, and can ensure the normal operation of the host within the range of – 30 ℃ ~ + 75 ℃, humidity 35% ~ 85% (non condensing).

Parameters

Measurement range0-360 °
Accuracy± 1 °
Resolution0.1 °
Starting wind speed≤ 0.5m/s
Maximum turning radius200mm
Output signalA: Voltage signal (0-2v, 0-5V, 0-10V)
B: 4-20mA (current loop)
C: RS485 (standard Modbus RTU protocol, device default address: 01)
Supply voltage5-24vdc (when the output signal is 0-2v, RS485)
12-24vdc (when the output signal is 0-5V, 0-10V, 4-20mA)
Working environment-30 ℃ ~ 75 ℃ (Not heated type),  -40 ℃ ~ 75 ℃(Heated type)
Humidity≤ 100% RH
Protection gradeIP65
Materialaluminum
Power consumption24V/8mA(Heater off), 24V/0.8A(Heater on)
Heating mothodPTC automatic heating (only for heating model)
Automatic heatingBellow -1 ℃ , reach 25 ℃  automatically stop heating

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.