SenTec

FST310 Stainless Steel Electronic Flow Switch

SenTec FST310 electronic flow switch based on the thermal principle, the sealed probe contains two resistors, one of which is not heated as the detection resistance and the other is not heated as the reference resistance. When the mecum flows, the heat on the heating resistance is taken away, the resistance value is changed, and the difference between the two resistors is used as the basis for judging the velocity. No moving parts, maintenance-free, easy to install, one type is suitable for a variety of pipe diameter requirements, switch volume continuously adjustable, very low pressure loss, compact structure, LED display flow trend and switch status.

Category

SenTec FST310 electronic flow switch based on the thermal principle, the sealed probe contains two resistors, one of which is not heated as the detection resistance and the other is not heated as the reference resistance. When the mecum flows, the heat on the heating resistance is taken away, the resistance value is changed, and the difference between the two resistors is used as the basis for judging the velocity. No moving parts, maintenance-free, easy to install, one type is suitable for a variety of pipe diameter requirements, switch volume continuously adjustable, very low pressure loss, compact structure, LED display flow trend and switch status. 

FST310 Gas-liquid dual type electronic flow switch is used for pneumatic and hydraulic systems, can be used for circulating water, cutting fluid and lubricating oil flow detection and pump idling protection.

Parameters

ITEMS

PARAMETER

ITEMS

PARAMETER

Set the range1…150cm/s(water),3…300cm/s(oil),20…2000cm/s(air)Response time1-13s, typical values 2s
Signal outputPNP, NPN, relay, Normally open+normally closed (SPDT)Initialization time8s
Power supply24±20%VDC or 230V±15%VACElectric protectionInvert, short circuit, overload protection
Turn on the currentMax. 400mA(PNP or NPN), Max. 4A(Relay)Protection gradeIP67
No-load currentMax. 80mAMedium temperature-20 ° C ~ 80 ° C
Flow indicatorLED row (6)Environment temperature-20 ° C ~ 80 ° C
Set wayPotentiometer settingStorage temperature-20 ° C ~ 100 ° C
Pressure range100barConnection modeM12 plug-in/direction attachment line
Temperature gradient≤4 ° C/SMaterialStainless steel
Weight0.4KG

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.