SenTec

MPF high temperature pressure transducer with Explosion-proof

MPF series explosion proof type high temperature pressure transducer is intrinsically safe and suitable for hazardous location such as flammable and explosive which are designed with safety circuit and low-power components.

MPF series explosion proof type high temperature pressure transducer is intrinsically safe and suitable for hazardous location such as flammable and explosive which are designed with safety circuit and low-power components. All-welded construction that features a 1/2-20 UNF thread for installation in standard transducer mounting holes. Many other threaded configurations are available. Temperature Compensation is based on an RTD measurement that compensates for temperature variations which reduces temperature-related drift and increases accuracy. No need to re-zero for temperature changes after installation. They converts pressure into anti-interference amplifying signals such as 4/20mA, or HART+4/20mA with high accuracy performance.

Parameters

Pressure range0~100Bar~2000bar (0~10Mpa~200Mpa)
Accuracy±0.25% FS, ± 0.5% FS
Output1.5mV/V, 2.0mV/V, 4~20mA, 0~5V, 0~10V
Input voltage24VDC (12-36V)
Repeatability± 0.1% FS
Overload pressure1.5 X FS
Bridge impedance350 Ohms ± 10%, 1000 Ohms ± 10%
Load resistance500Ω @26VDC, 1000Ω @36VDC,
Internal self-calibration80% FS ± 1%
Temperature componentPT100, E, J, K
Maximum diaphragm temperature400 ° C
Diaphragm material15-5PH, 17-4PH, Inconel718
Electrical connectionsLead wire or Bendix connector
Process connectionFlange type, thread type

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.