SenTec

PW220 Electronic Digital Pressureswitch

PW220 Pressureswitch is an intelligent digital pressure measurement and control product that integrates pressure measurement, display, output and control. The all-metal housing design, with a highlighted LED digital display with full electronic structure.

Category

PW220 Pressureswitch is an intelligent digital pressure measurement and control product that integrates pressure measurement, display, output and control. The all-metal housing design, with a highlighted LED digital display with full electronic structure. The front end adopts the pressure sensor with isolation membrane and oil pressure resistance or ceramic pressure resistance sensor. The output signal is amplified and processed by the amplifier with high precision and low temperature drift, sent to the high precision A / D converter, converted into the digital signal that can be processed by the microprocessor. The signal processed by calculation controls two-way switches to measure and control the pressure of the control system. The product is flexible in use, simple in operation, easy in debugging, safe and reliable. It is widely used in hydropower, tap water, petroleum, chemical, mechanical, hydraulic and other industries to measure, display and control the pressure of fluid medium.

Parameters

Control range-1bar~1000bar, 0~25 bar(Differential pressure type)
Power supply voltage12… 30 VDC
No-load current consumptionup to 30mA,24Vdc power supply
Switch outputpush-pull type (PNP and NPN optional) often open often closed can be set on site

S1, S2 output current: <500mA

Response time: <10ms

Analog current outputOutput type: three lines 0… 20 ma / 4… Can be set to 20 ma
Load RA: 0.5 KOhm or less
Linearity: ≤0.5% range
Wiring protectionphase reversal, overload, paragraph protection
Digital displayDesign: red 4-bit 8mm high brightness LED

Display range: 999… 9999

Accuracy≤±0.5% F.S.
Stability (annual drift)≤±0.3% F.S.
TemperatureMedium temperature: -20… 85 ° C
Ambient temperature: -20… 80 ° C
Storage temperature: -30… 80 ° C
MaterialCase of watch head: engineering plastics
Case: 304 stainless steel
Medium contact part: stainless steel 316L

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.