SenTec

sentec

PW440D Transmission fluid pressure switch with differential pressure

PW440D series Transmission fluid pressure switch is a full digital measurement and control product integrating pressure / differential pressure measurement, display, contact control and transmission output.

Category

PW440D Transmission fluid pressure switch is a full digital measurement and control product integrating pressure / differential pressure measurement, display, contact control and transmission output. It can set zero point value, full degree value, contact pressure / differential pressure value and other parameters on site with the key. It is widely used in hydropower, tap water, petroleum, chemical, mechanical, hydraulic and other industries to measure, display and control the pressure / differential pressure of fluid medium.

Parameters

Control range-0.1~0.1~100MPa
Overload ability1.5%(full range)
Accuracy±0.1%FS;±0.25%FS;±0.5%FS
Signal output4~20mA, RS485
Power supply24VDC,220VDC, 220VAC
Control point1~5 control point
Load capacity220V/3A(AC)
Display range-1999~9999
Maximum power< 3.5W
Long stability≤0.5% /year
Ambient temperature-30°C~60 °C
Medium temperature-10°C~80 °C (High temperature customized)
Relative humidity0~80%
Protection gradeIP65
Installation methodVertical and axial installation
Shell materialstainless steel
Pressure sensitive film316L stainless steel
Electrical connectionKF2EDG terminal block or RVVP cable

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.