SenTec

SEM228T-A Class A Solar Pyrgeometers

The SEM228T-A seriesClass A Solar Pyrgeometers is a shortwave total radiation sensor used for solar radiation observation. It is a Class A total radiation sensor conforming to the latest ISO 9060 and WMO technical standards. It measures solar radiation received by a horizontal plane from a solid angle of 2 T steradian degrees (hemispherical), with units of W/m’.

The SEM228T-A seriesClass A Solar Pyrgeometers is a shortwave total radiation sensor used for solar radiation observation. It is a Class A total radiation sensor conforming to the latest ISO 9060 and WMO technical standards. It measures solar radiation received by a horizontal plane from a solid angle of 2 T steradian degrees (hemispherical), with units of W/m’.

The SEM228T-A series Class A Solar Pyrgeometers operates in a completely passive mode, utilizing a thermopile sensor to generate an output voltage proportional to the incident radiation flux. Due to the use of two spherical glass domes, measurement errors, especially thermal offset, are reduced, resulting in high measurement accuracy.

Application

Used for meteorological observation, building physics, climate, and solar energy harvesting experiments. A common application is as part of a weather station to measure outdoor solar radiation.

Parameters

Classified according to ISO 9060/WMO standardsGrade A/Good Quality
Response time (95% response)<5s
Zero-point offset: Corresponding to 200 W/m² net thermal radiation (ventilation)<7 W/m²
Stability (Variation/Year, Percentage of Full Scale)±0.5%
Nonlinearity±0.2%(100~1000 W/m²)
Directional Response±10 W/m²
Temperature Response<1%(-10~40℃)
Tilt Response<0.5%
Sensitivity Range7-14μV/(W/m²)
Operating Temperature-40~+80℃
Internal Resistance<50Ω
Standard Cable Length3m
Measurement Range0~4000W/m²
Cable ReplacementUsers can remove and install cables
Spectral Range280~3000 nm (50% transmittance)
Reading RequirementsOne differential voltage channel or one single-ended voltage channel
Horizontal CalibrationIncludes bubble level and adjusting feet
Solar Exposure Uncertainty±1%
Weight (excluding cable)0.8kg
Calibration TraceabilityWRR traceability, procedure according to ISO9847
Recommended Calibration CycleBiennially
Output SignalOriginal output 0~20mV,Optional RS485/4~20mA output (not for external transmitter)

Documents

Take the next step

Get a Quote

Request a quote from us based on your specific requirements

To be a Distributor

If you want to distribute sentec brand in your local area, you can contact us for more.

Installation & Maintain

A group of  professional engineer is here to help your sensor installation & maintenance.